Looking for:
- Logic pro x sound library progress free |
Logic pro x sound library progress free. Manage Logic Pro content
Once you have gained a solid understanding of it, you will be on your way to a great time creating music with Logic Pro. We will begin by explaining the Logic Pro windows, exploring its menus, and mastering its terminology so that we are clear on what we are discussing as we learn to use Logic Pro. Shockingly the main window you see when you open a new Logic Pro project is called … wait for it … the Mai n Window! You may hear some long-time Logic Pro users refer to it as the Arrange window because for many, many years that was indeed what the window was named.
Most of what you need to do in Logic Pro can indeed be done in only this window, but as you will learn, there are other options. By default, Quick Help will be turned on and it is very helpful for beginners.
As you hold your mouse or trackpad down on each button, Quick Help will tell you what it is. I recommend that you click each one and see how they behave when toggled on and off. The problem is that Logic Pro cannot see an audio interface. If you do not have one hooked up, Logic Pro should default to your built-in audio with a laptop or iMac. If it isn't seeing that or your audio interface, go under the Logic Pro menu to Preferences Audio and in the Devices tab, select the audio interface or built-in options and click Apply Changes.
Don't worry about the other settings for now. The Control bar is one of the three main areas of the Main Window and it is very important to your workflow and extremely customizable, which will be especially helpful for laptop users who are screen real estate challenged.
Directly below the Control bar is the Bar Ruler , which displays bars and beats. The vertical white line you see is called the Playhead and if you press the play button, you will see it start to move throughout the project until you press the stop button.
Pressing the rewind button brings you back to the beginning. Below the bar ruler is the second important area in the main window, the Tracks area. It contains the Track List and the grid where you will record and edit all your regions, called the Tracks Area although the Quick Help refers to it as the Workspace. On the left side of the GUI, you see the third important area — it's called the Inspector.
If you have Quick Help toggled on, you will see an area at the top with the description Quick Help. You will also see a disclosure triangle that closes it.
Below it is the part of the Inspector that affects the region, called the Region Inspector. Settings there will affect any regions you select, whether they are on the same track or different tracks. It too has a disclosure triangle to close it, but also another to show more within it. The next area in the Inspector has settings that control the entire track and is called the Track Inspector. Below that are two faders, similar to what you might see on a recording console.
The one on the left pertains to the Channel Strip of the selected track while the one on the right of it shows the Stereo Output, where all signal goes to if you are working "in the box" and then going out of your audio interface with outputs going to hardware mixers, or a tape recorder, or another hardware device. There is some Logic Pro terminology that often confuses newcomers, and for a very good reason — it is confusing. As before, we see choices for creating new tracks:.
The truth is, we are creating tracks, but we are also creating channel strips, each with a single track flowing through it. But it is possible to have multiple tracks flowing through the same channel strip, and there are times that you will want to. For now, create a Software Instrument track with Details showing. External MIDI is for recording sounds from a keyboard or tone module while Guitar or Bass is actually also an audio track with different plugin choices.
The Library has a collection of already created patches. A patch is a collection of plugins designed to help you achieve a certain sound. You can also create your own and save them to the library. The Library's visible content is related to the kind of channel strip you choose in the Track List.
If it's an Audio channel strip, you will see various kinds of FX plugins. If it's a Drummer channel strip, you will see drummers and drum kits:. Congratulations, you have just learned your first key command.
I will be showing you some more, and I encourage you to keep a list or memorize them. My personal motto is "never do by dragging the mouse or trackpad around what you can do with a keystroke. While we are at it, press the letter I and notice that you can toggle the Inspector open and hidden. If those do not work, then the key command sets are not assigned properly. They should be set correctly by default but I occasionally have seen Logic default to a Pro Tools compatible set seemingly for no reason.
If the key commands are not working, go to the Logic Pro menu to Key Commands Presets and choose the ones appropriate for your language. If you either click the Toolbar button on the Control bar or under the LCD display, grab the blue line, and drag down, you will see the Toolbar.
Many users still find it useful, and like the Control bar, it is customizable:. If you are using a laptop with a small display, it is entirely possible that you will not see everything included by default and will see some arrows that you can hold down on to see more.
Even on a large display or two displays, however, the default is not optimal for working with Logic Pro in my opinion, so I will show you how to customize it to your specific needs now. On the right side of the LCD in the center of the Control bar, if you hold down your mouse or trackpad, you will see some options for the Control bar display:. No worries, this is where customizing is powerful.
Look at the default Views that are checked:. If you memorize the relevant key commands, most of these are unnecessary. In fact, I have already mentioned a couple, but now I will give you a list:. If you memorize some or all of these, you can uncheck them here and free up space in the Control bar.
I recommend that you uncheck all but the more complicated ones. Under the Transport menu, you can check or uncheck what you would like to see. Since I know that the spacebar puts Logic Pro into play mode, while pressing it again stops playback, and the Enter key returns to the beginning, I don't need many of these, but for you, you may feel more comfortable leaving it as it is.
When we visit audio recording in the next chapter, you will understand why. I have also made some changes that suit me in Modes and Functions , but frankly, I change these often. Once you have made your choices, you can then click Save As Default.
While these are Project Settings and not Preferences, they are not global to Logic, but they will now ensure that every new Logic project will default to them. When you open an earlier Logic project, if you open your customizing window again, you can choose Apply Defaults and then resave the project.
Right-clicking or clicking on the Toolbar while holding the Control key gives you a similar menu of choices to what you see on the Toolbar. I rarely use the Toolbar so I have no specific recommendations, but you may reach a very different conclusion and that is fine.
Logic comes with a ton of content, including software instruments, FX, and Apple loops. You will want to make sure you have downloaded it all to your main hard drive. Later, you can move the content to another drive quite easily you will see Relocate Sound Library… in the following screenshot :. If you choose Open Sound Library Manager… , you will see whether they are all installed. If not, choose Select all unfinished and they will download.
You will see a thin blue progress bar below the Control bar. You can download in the background while you continue to work in Logic Pro. The Browser is the area where you can see audio files that are in your project, in other projects, and in iTunes or your Movies folder. You open the Browser by clicking the icon in the Control bar or by pressing the letter F on your computer keyboard.
Some of this may be a little over your head at this point but don't worry. You can always come back and review it later when you are more comfortable with Logic Pro, but since it is one of the main areas in Logic, I feel it is important to explain the Browser to you.
The Project Browser shows you your project audio without the necessity of opening the Project Audio window:. In this window, it is easy to drag audio files into the workspace that are not in the workspace. Select Used or Unused to see which are in the workspace and which are not, or delete those you are not using. This browser provides you with a view of music in the music app or movies you have so that you can import them into your project. I hardly ever use it, frankly:.
There are three buttons at the top: Computer , Home , and Project. In the following screenshot, Computer is chosen:. In the Computer view, you see all your storage devices to search for files you might want to add to your project. The Project button shows all the projects in your Project folder, which is where Logic Pro saves projects by default. This is the most useful browser area in my opinion, as it allows you to import Global settings, tracks, and content.
When you select a project in this window, you can click on Import Project Settings at the bottom-right of the window and you then have the ability to choose exactly what you wish to import into your project. With the tabs at the top, you can filter what you wish to see, for greater ease of viewing. There is a slider at the bottom that allows you to see more things you can import, such as Sends :. The Loop Browser is where you will find a massive bunch of royalty-free Apple Loops that you may use in your musical projects.
You probably have heard many of them already. If, for instance, you have heard Rihanna's big hit " Umbrella, " you have heard Apple Loops on a commercial recording. Apple loops have the virtue of adapting to any tempo or key. There are Audio loops, Software Instrument loops, Drummer loops, and You can open the Loop Browser by clicking on the button that looks like a loop on the right-hand side of the Control bar, but heck, why not just press the letter O?
Logic defaults to a tempo of beats per minute bpm and the key of C major. Loops are categorized by Instruments, Genre, Descriptors, and even Moods. You won't see Moods in the default Button view but if you click on the icon next to it, it changes to Column view, and then you do. You can also tag some as Favorites.
You can sort them by name the default or the number of beats, or tempo, or key, just by clicking on any one of those above the loops list. There are also loop packs that you can access by holding the mouse or trackpad down where you see All Packs. We have narrowed down the choices a bit.
You can listen to a loop to audition it just by clicking on it, and you will hear it at the tempo, and key if it is melodic or harmonic, of the Logic project. I kind of dig Light The Fuse Beat I see that it is an Audio loop because of the blue wave symbol, that it is four measures long 16 beats , and that was originally at bpm, but it sounds fine at Remember Me? The No. Today's Posts competitions support us FAQ advertise our advertisers newsletter.
When you buy products through links across our site, we may earn an affiliate commission. Learn more. How to install Logic Pro X and point to the sound library already downloaded. Here's what I've already done: 1. I downloaded the essential files of the library to the internal disk, those that are offered when you start Logic the first time 2. I replaced the "Library" folder on my external drive by copying all the files from my brother's library 4.
I restarted Logic and saw that the library is not recognized, there are download icons next to the name of the presets How can I solve it?
Thank you. My Studio.
No comments:
Post a Comment